

型号配置: Airpods 3 Airpods 4 Airpods pro1 Airpods por2 Airpods pro3 模型介绍: 规格:长度15-21cm模型大小会随着耳机型号的大小有所变化 打印:配置内零件已逐个验证并优化,可直接打印!打印前一定处理好打印板(做清洁、喷胶等稳固措施),炒面费时费料坏心情! 上色:模型黑色部分为黑色马克笔手动涂色,涂色部分已经做了凸起跟凹陷上色非常简单~快来动手试试吧!...
Genshin AirPods Case, Five Models is an accessory for AirPods, inspected and boxed before it leaves us. It is printed in PLA, about 79 g finished, 2 colours and built over 10 plates and assembled where it needs to be. It is shaped around the AirPods, so check your exact model against the photographs before ordering: a part cut for one generation rarely fits the next. Shoppers usually find it under airpods3, airpods4, airpodspro1, airpodspro2 and airpodspro3.
You get the finished accessory, not a file and not a bag of parts. It is in stock at Rs 1,999, delivered anywhere in India within 7 days, with free shipping over Rs 5,000. PLA is rigid and holds fine detail. Keep it out of a parked car or direct summer sun, where any PLA piece can soften. Stock sits here in India, which is why it arrives in days rather than weeks.
| Category | Hobby & DIY / Other Hobby & DIY |
|---|---|
| Weight | 79 g |
| Material | PLA |
| Colours | 2 |
| Finish | Inspected, cleaned and assembled where needed |
| Availability | In stock, ready to ship |
| Delivery | Within 7 days, anywhere in India |
| Returns | Not accepted on these products. Anything that arrives damaged or wrong is replaced, so tell us within 48 hours |
| Product | Genshin AirPods Case, Five Models |
|---|---|
| Type | Hobby & DIY / Other Hobby & DIY |
| Made for | AirPods |
| Material | PLA |
| Weight | 79 g |
| Colours | 2 |
| Price | Rs 1,999 |
| Availability | In stock |
| Delivery | Within 7 days across India |
| Sold by | Igul Store by DueDoor |







If you bought the Genshin AirPods Case, Five Models from DueDoor, leave a review and help the next buyer decide. Reviews posted through your order are marked Verified buyer.
Yes. The Genshin AirPods Case, Five Models is a finished accessory for AirPods held in stock in India. Orders are packed the day they come in and delivered within 7 days.
It is printed in PLA, and the finished piece weighs about 79 g. PLA is rigid and holds fine detail. Keep it out of a parked car or direct summer sun, where any PLA piece can soften.
It is made for the AirPods as the design names it. Fit is model specific, so compare your exact model with the photographs before ordering. If it arrives and does not match what was listed, tell us within 48 hours.
It is printed in 2 colours as shown in the photographs. Shades can vary a little between batches because filament dye lots vary. Message us on WhatsApp before ordering if you need an exact colour.
The Genshin AirPods Case, Five Models is Rs 1,999. Shipping is Rs 99 on orders under Rs 5,000 and free at Rs 5,000 and above, delivered within 7 days anywhere in India.
Returns are not accepted on these limited-run pieces. If it arrives damaged, faulty or is not what you ordered, tell us within 48 hours and we replace it at no cost.
Igul Store by DueDoor finishes, checks and ships it from India. Questions go to WhatsApp on +91 84390 31324.