圣斗士星矢 Seiya 分件打印（无需AMS）
游戏角色合集（包含了所有本人制作的经典游戏角色） 中国区入口 国际区入口 组装注意事项： 先安装面部，然后前后头发，再安装其他部位， 腰带组装不要装反了。先测试安装。 材料建议PLA： 圣衣使用丝绸材料，建议亮银，我没有使用的是拓竹丝绸银 肤色 红色 黑色 组装需要使用到胶水 其他尺寸100%基础自行缩放即可 （仅供打印学习，请勿商用
Weight
307 g finished piece
Material
PLA
Availability
In stock ships within 7 days
Rs 3,599
incl. material and finishing
1
- In stock, delivered within 7 days
- Free shipping on orders over Rs 5,000
- Inspected before it leaves us
- No returns on this product, damaged or wrong items replaced
About this character
圣斗士星矢 Seiya 分件打印（无需AMS） is a 3D printed character, finished by hand and kept in stock in India. It is printed in PLA, about 307 g finished, 5 colours and built over 15 plates and assembled where it needs to be. Shoppers usually find it under 圣斗士, seiya, 圣斗士星矢 and 黄金圣斗士.
What arrives
You get the finished character, not a file and not a bag of parts. It is in stock at Rs 3,599, delivered anywhere in India within 7 days, with free shipping over Rs 5,000. PLA is rigid and holds fine detail. Keep it out of a parked car or direct summer sun, where any PLA piece can soften. It ships from our warehouse in India, so it reaches most addresses within a week.
Product details
| Category | Toys & Games / Characters |
|---|---|
| Weight | 307 g |
| Material | PLA |
| Colours | 5 |
| Finish | Inspected, cleaned and assembled where needed |
| Availability | In stock, ready to ship |
| Delivery | Within 7 days, anywhere in India |
| Returns | Not accepted on these products. Anything that arrives damaged or wrong is replaced, so tell us within 48 hours |
Key facts
| Product | 圣斗士星矢 Seiya 分件打印（无需AMS） |
|---|---|
| Type | Toys & Games / Characters |
| Material | PLA |
| Weight | 307 g |
| Colours | 5 |
| Price | Rs 3,599 |
| Availability | In stock |
| Delivery | Within 7 days across India |
| Sold by | Igul Store by DueDoor |
More in Characters
Toys & Games · Characters
Voronoi Phoenix - Rise from the ashes!
Rs 2,899
Multi-colour
Toys & Games · Characters
【 】Spider-Man（Miles Morales）蜘蛛侠迈尔斯
Rs 9,599
Multi-colour
Toys & Games · Characters
Brand New Day
Rs 10,099
Multi-colour
Toys & Games · Characters
Jiminy Cricket
Rs 3,099
Multi-colour
Toys & Games · Characters
Flexi Basketball Buddy
Rs 1,699
Multi-colour
Toys & Games · Characters
Surfing dog meme
Rs 2,499
Multi-colour
Toys & Games · Characters
Peter Parker Sitting on Shelf Figure | Spider-Man
Rs 1,899
Multi-colour
Toys & Games · Characters
Venom Figure - High Detail
Rs 7,499
Browse the range
Reviews
No reviews yet. Only people who have bought this can leave one, so the first review here will be from a real order.
Used this one?
If you bought the 圣斗士星矢 Seiya 分件打印（无需AMS） from DueDoor, leave a review and help the next buyer decide. Reviews posted through your order are marked Verified buyer.
Frequently asked questions
Is the 圣斗士星矢 Seiya 分件打印（无需AMS） in stock?
Yes. The 圣斗士星矢 Seiya 分件打印（无需AMS） is a finished 3D printed character held in stock in India. Orders are packed the day they come in and delivered within 7 days.
What is the 圣斗士星矢 Seiya 分件打印（无需AMS） made of?
It is printed in PLA, and the finished piece weighs about 307 g. PLA is rigid and holds fine detail. Keep it out of a parked car or direct summer sun, where any PLA piece can soften.
What colour is the 圣斗士星矢 Seiya 分件打印（无需AMS）?
It is printed in 5 colours as shown in the photographs. Shades can vary a little between batches because filament dye lots vary. Message us on WhatsApp before ordering if you need an exact colour.
How much is delivery on the 圣斗士星矢 Seiya 分件打印（无需AMS）?
The 圣斗士星矢 Seiya 分件打印（无需AMS） is Rs 3,599. Shipping is Rs 99 on orders under Rs 5,000 and free at Rs 5,000 and above, delivered within 7 days anywhere in India.
Can I return the 圣斗士星矢 Seiya 分件打印（无需AMS）?
Returns are not accepted on 3D printed products. If it arrives damaged, faulty or is not what you ordered, tell us within 48 hours and we replace it at no cost.
Who makes and sells this?
Igul Store by DueDoor prints, finishes and ships it from India. Questions go to WhatsApp on +91 84390 31324.